 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ( DataSheet : www..com ) Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. *This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering. C02E9.pdf 02.4.27 Chip Monolithic Ceramic Capacitors AC250V Type (Which Meet Japanese Low) s Features 1. Chip monolitic ceramic capacitor for AC line. 2. A new monolithic structure for small, highcapacitance capable of operating at high-voltage levels. 3. Sn-plated external electrodes realize good solderability. 4. Only for Reflow soldering. 5. Capacitance 0.01 to 0.1 uF for connecting lines and 470 to 4700 pF for connecting line to earth. e g e L W Part Number GA252D GA255D L 5.7 0.4 Dimensions (mm) W T e min. 2.8 0.3 2.0 0.3 0.3 5.0 0.4 g min. 3.5 s Applications Noise suppression filters for switching power supplies, telephones, facsimiles, modems. s Refference srandard JIS C 5102 JIS C 5150 The standards of the electrical appliance and material safety law of Japan, separated table 4. Rated Voltage (V) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) AC250 (r.m.s.) Length L Width W Thickness T (mm) (mm) (mm) 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 5.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Electrode g (mm) 3.5 min. 3.5 min. 3.5 min. 3.5 min. 3.5 min. 3.5 min. 3.5 min. 3.5 min. Electrode e (mm) 0.3 min. 0.3 min. 0.3 min. 0.3 min. 0.3 min. 0.3 min. 0.3 min. 0.3 min. Part Number GA252DB3E2471MY02L GA252DB3E2102MY02L GA252DB3E2222MY02L GA252DB3E2472MY02L GA252DB3E2103MY02L GA252DB3E2223MY02L GA252DB3E2473MY02L GA255DB3E2104MY02L TC Code B B B B B B B B Capacitance 470pF +20,-20% 1000pF +20,-20% 2200pF +20,-20% 4700pF +20,-20% 10000pF +20,-20% 22000pF +20,-20% 47000pF +20,-20% 0.1F +20,-20% 17 108 www..com www..com T Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. *This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering. C02E9.pdf 02.4.27 Specifications and Test Methods No. 1 2 3 Item Operating Temperature Range Appearance Dimensions Y25 to W85D No defects or abnormalities. Within the specified dimensions. Visual inspection. Using calipers. No failure shall be observed when voltage as table is applied between the terminations for 60T1 s, provided the charge/discharge current is less than 50mA. Nominal Capacitance Test voltage CU10,000pF AC575V (r.m.s.) CF10,000pF AC1500V (r.m.s.) The insulation resistance shall be measured with 500T50V and within 60T5 s of charging. The capacitance/D.F. shall be measured at 20D at a frequency of 1T0.2kHz and a voltage of 1T0.2V (r.m.s.) #Pretreatment Perform a heat treatment at 150 W00 D for 60T5 min and then Y10 let sit for 24T2 h at room condition. The range of capacitance change compared with the 20D value within Y25 to W85D shall be within the specified range. #Pretreatment Perform a heat treatment at 150 W00 D for 60T5 min and then Y10 let sit for 24T2 h at room condition. As in Fig., discharge is made 50 times at 5 s intervals from the capacitor(Cd) charged at DC voltage of specified. Discharge Test (Application: Nominal Capacitance CF10,000pF) R3 R1 Specification Test Method Y 4 Dielectric Strength No defects or abnormalities. 5 6 Insulation Resistance (I.R.) Capacitance Dissipation Factor (D.F.) More than 2,000M Within the specified tolerance. 7 0.025 max. 8 Capacitance Temperature Characteristics Cap. Change Within T10% 9 Appearance No defects or abnormalities. 10kV V Cd Ct R2 Ct : Capacitor under test Cd : 0.001F R1 : 1,000 R2 : 100M R3 : Surge resistance Solder the capacitor to the testing jig (glass epoxy board) shown in Fig.1 using a eutectic solder. Then apply 10N force in the direction of the arrow. The soldering shall be done either with an iron or using the reflow method and shall be conducted with care so that the soldering is uniform and free of defects such as heat shock. 10N, 10T1s Speed : 1.0mm/s Glass Epoxy Board 10 Adhesive Strength of Termination No removal of the terminations or other defects shall occur. Fig.1 Appearance Capacitance No defects or abnormalities. Within the specified tolerance. Solder the capacitor to the test jig (glass epoxy board). The capacitor shall be subjected to a simple harmonic motion having a total amplitude of 1.5mm, the frequency being varied uniformly between the approximate limits of 10 and 55Hz. The frequency range, from 10 to 55Hz and return to 10Hz, shall be traversed in approximately 1 min. This motion shall be applied for a period of 2 h in each 3 mutually perpendicular directions (total of 6 h). 11 Vibration Resistance D.F. 0.025 max. 17 Solder resist Cu Glass Epoxy Board "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa Continued on the following page. 109 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. *This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering. C02E9.pdf 02.4.27 Specifications and Test Methods Continued from the preceding page. No. Item Specification Test Method Solder the capacitor to the testing jig (glass epoxy board) shown in Fig.2 using a eutectic solder. Then apply a force in the direction shown in Fig. 3. The soldering shall be done either with an iron or using the reflow method and shall be conducted with care so that the soldering is uniform and free of defects such as heat shock. 20 50 Pressurizing speed : 1.0mm/s Pressurize R230 Flexure=1 Capacitance meter 45 45 No cracking or marking defects shall occur. 12 TR S QT S Q , R , T S d c b 4.5 Deflection a 100 t : 1.6 LZW (mm) 5.7Z2.8 5.7Z5.0 a 4.5 4.5 Dimension (mm) b c 8.0 3.2 8.0 5.6 40 d 1.0 (in mm) Fig.2 Solderability of Termination Appearance Capacitance Change 14 Humidity Insulation D.F. I.R. Dielectric Strength Appearance Capacitance Change D.F. Resistance 15 to Soldering Heat I.R. Fig.3 Immerse the capacitor in a solution of ethanol (JIS-K-8101) and rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in eutectic solder solution for 2T0.5 s at 235T5D. Immersing speed : 25T2.5mm/s 13 75% of the terminations are to be soldered evenly and continuously. No marking defects. Within T15% 0.05 max. More than 1,000M Pass the item No.4. No marking defects. Within T10% 0.025 max. More than 2,000M Preheat the capacitor as table. Immerse the capacitor in eutectic solder solution at 260T5D for 10T1 s. Let sit at room condition for 24T2 h, then measure. #Immersing speed : 25T2.5mm/s #Pretreatment Perform a heat treatment at 150 W00 D for 60T5 min and then Y10 let sit for 24T2 h at room condition. *Preheating Pass the item No.4. Step 1 2 Temperature 100D to 120D 170D to 200D Time 1 min 1 min The capacitor shall be subjected to 40T2D, relative humidity of 90 to 98% for 8 h, and then removed in room condition for 16 h until 5 cycles. Dielectric Strength Appearance Capacitance Change D.F. I.R. No marking defects. Within T7.5% 0.025 max. More than 2,000M 16 Temperature Cycle Dielectric Strength Fix the capacitor to the supporting jig (glass epoxy board) shown in Fig.4 using a eutectic solder. Perform the five cycles according to the four heat treatments listed in the following table. Let sit for 24T2 h at room condition, then measure. Time (min) Temperature (D) Step 1 Min. Operating Temp.T3 30T3 2 Room Temp. 2 to 3 3 Max. Operating Temp.T2 30T3 4 Room Temp. 2 to 3 #Pretreatment Perform a heat treatment at 150 W00 D for 60T5 min and then Y10 let sit for 24T2 h at room condition. 17 Pass the item No.4. Solder resist Cu Glass Epoxy Board Fig.4 "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa Continued on the following page. 110 Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage and operating, rating, soldering and mounting, handling) in this PDF catalog to prevent smoking and/or burning, etc. *This catalog has only typical specifications. Therefore, you are requested to approve our product specification please approve our product specification or transact the approval sheet for product specification before ordering. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, or to transact the approval sheet for product specificaion before ordering. C02E9.pdf 02.4.27 Specifications and Test Methods Continued from the preceding page. No. Item Appearance Capacitance Change D.F. I.R. Dielectric Strength Appearance Capacitance Change D.F. No marking defects. Within T15% 0.05 max. More than 1,000M Pass the item No.4. No marking defects. Within T15% 0.05 max. More than 1,000M Specification Test Method 17 Humidity (Steady State) Sit the capacitor at 40T2D and relative humidity 90 to 95% for 500 W24 h. Y00 Remove and let sit for 24T2 h at room condition, then measure. #Pretreatment Perform a heat treatment at 150 W00 D for 60T5 min and then Y10 let sit for 24T2 h at room condition. Apply voltage and time as Table at 85T2D. Remove and let sit for 24 T2 h at room condition, then measure. The charge / discharge current is less than 50mA. Nominal Capacitance CU10,000pF CF10,000pF Test voltage Test Time 1,000W48 h AC300V (r.m.s.) Y10 1,500W48 h AC500V (r.m.s.) * Y10 18 Life I.R. * Except that once each hour the voltage is increased to AC1,000V (r.m.s.) for 0.1 s Dielectric Strength Pass the item No.4. #Pretreatment Apply test voltage for 60T5 min at test temperature. Remove and let sit for 24T2 h at room condition. Appearance Capacitance Change 19 Humidity Loading D.F. I.R. Dielectric Strength No marking defects. Within T15% 0.05 max. More than 1,000M Pass the item No.4. Apply the rated voltage at 40T2D and relative humidity 90 to 95% for 500 W24 h. Y00 Remove and let sit for 24T2 h at room condition, then measure. #Pretreatment Apply test voltage for 60T5 min at test temperature. Remove and let sit for 24T2 h at room condition. "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa 17 111 |
Price & Availability of GA255DB3E2104MY02L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |